The Type V insert can be used in any Mystery Electronics ModuLine Enclosure. Some models have only limited space behind the panel. When using RG6 and/or data grade standard coax cable, it is recommended that allowance be made to meet the cable manufacturers' minimum bend radius requirements.

The Type V insert is pre-punched for five BNC connectors intended for applications having five separate signals for video such as; RGB, sync and composite; RGB, horizontal and vertical, etc.

For applications requiring audio connections, a ¼” hole which will accommodate a stereo 3.5mm mini TRS connector is provided. Also the ¼” hole and the provided pilot hole may be modified to 3/8” in order to accommodate applications requiring two RCA phono connectors

The color-coded label is used to denote the signal type; red = R, green = G, blue = B, yellow = sync or vertical, white = composite or horizontal.

The Type V insert packaging contains three washers which must be used when mounting the Type V insert in order to protect the insert label. The washers install beneath the heads of the insert mounting screws provided with the enclosure hardware kits.

The hole pattern used on Type V inserts produced after Mar. 2004 is as follows :

Any crimp style, solder tab, or feedthru (bulkhead) connector based on a single “D” hole with clearance for ½ - 28 UNEF threads is compatible with this hole pattern without field modification. The hole pattern accommodates the largest selection of BNC style connectors, available from a variety of manufacturers, and is generally considered a standard in the video and RF instrumentation industry.

Non-compatible connector brands or versions that use an insulated bushing system may require minor modification.

Compatible connectors are available from Aim ® , Amphenol ® , Cambridge ® , Canare ® , Switchcraft ® , etc., and through electronic parts distributors in most markets.

BNC connectors may also be purchased directly from Mystery Electronics and loaded at an additional charge.