HandHold Option

The HandHold-equipped floor box can be configured for applications that would normally require field modification or a custom-fabricated box. It has an open bottom that allows cables to pass through it. The Insert Bracket kit or the Expander Panel kit configures the option even

further for mounting connectors in the ends or bottom of the basket. The HandHold Option can be ordered with or without power, and is available on the FMCA2000 and FMCA3000 series.

Cover shown for reference only.

HandHold Option

For each HandHold basket desired, specify HH, HR, or HT in place of

in the FMCA2000 or FMCA3000 model number. Example: FMCA24HR

HH	HandHold basket option
HR	HandHold basket w/ duplex receptacle (120VAC-15A) in one end
HT	HandHold basket w/ duplex receptacle (120VAC-15A) in both ends

FMCA2000 series can be ordered with one HandHold Option.
FMCA3000 series can be ordered with two HandHold Options.
IB and XP kits are ordered separately.

Insert Bracket kit

The IB kit mounts a ModuLine Insert into HH or HR basket without interfering with the HandHold opening or XP panel.

Specify one ModuLine Insert type in place of in model number below.

IB-

HH accepts two IB kits.
HR accepts one IB kit.
IB is not available on HT basket.

Expander Panel kit

The XP kit mounts a custom flat panel into the bottom of any HandHold basket. Includes all hardware and laser cutting to your specification.

XP kit

Nominal size: 7¼”x4½” (7”x3½” useable panel space)

HandHold Related Documents
printable version \| cutsheet \|